|
|
Wooden Based Detached House Vinium
Ždánský, Adam ; Šibal, Jan (referee) ; Králová, Zuzana (advisor)
This bachelor thesis deals with design of timber frame house situated in the cadastre unit Žarošice, region Hodonín. It is a detached house standing in new created resident area. It is designed for a family of four. The houses has two storeys without basement. Next to house is located detached garage and garden house. There is gable roof and flat roof with parapet wall. It is designed as a timber frame construction covered with gypsum fibreboard Fermacell.
|
|
|
Apartment building
Hajiyev, Mustafa ; Machová, Petra (referee) ; Vajkay, František (advisor)
Předmětem této bakalářské práce je zpracování projektové dokumentace bytového domu. Nachází se v Brně-venkov, v katastrálním území Hrušovany u Brna. Bytový dům leží na svažitém pozemku a je orientován na severní stranu. Má čtyři nadzemní podlaží a v každém patře kolem budovy je balkon. Střecha je plochá betonová střecha se sklonem 5%. Celá konstrukce bytového domu je ze železobetonu a zdiva s hlavním využitím na stavební materiály od společnosti HELUZ. Všechny izolační materiály jsou od společnosti ISOVER. Výkresová dokumentace nezbytná pro realizaci tohoto bytového domu byla zpracována v počítačovém programu AutoCAD. Rovněž jsou zohledněna řešení požární bezpečnosti pro tento projekt.
|
|
|
Meatpacking plant
Majtán, Marián ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The diploma thesis is focused on project documentation of Meat packing plant. Along with meat processing the documentation solve question of accomodation for employees. Building consists of two main sections: The processing – it is structured under requierements of meat packing industry. Second one is residential part set in 2nd, 3rd and 4th floor. Main inspiration for design are meat packing plants in Scandinavian countries, where is often need to provide accomodation to employess because of disadvantageous geographic locality. Building is built of Heluz building system, perimeter walls consists of insulation filled blocks. Building is without basement and it is based on footings of plaint. The roof is flat, partially designed as extensive green roof. Isover system is used to thermal insulation. A part of object is also asphalted plain for transport goods to and from the meat packing plant.
|
|
|
Kindergarten, Uhřice
Ždánský, Adam ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The subject of this thesis is design of a new kindergarten for 36 children in the village Uhřice near Kyjov. The design is made in level of detailed design. The designed building is a partial basement, two-storey building of elongated shape. The facade of the building is designed as ventilated with wooden cladding, the northern part of the building is with contact thermal insulation system. The building has two single-layer flat roofs, one with a vegetation layer, the other with a PVC roofing with an attic. Entrance to object is from south side. On the first floor there are two separate departments for education of children with facilities and there is a technical-economic background in third part. On the second floor there are special classrooms that can be used by both the kindergarten and the adjacent elementary school, as well as the public. There is also a central office, a meeting room and a special speech therapy room. On the underground floor there are warehouses and technological facilities. Static scheme of the building consists is combined system of ceramic blocks and reinforced concrete columns with girders, in the basement is used reinforced concrete walls. The ceilings are designed from prestressed spiroll panels. Park landscaping was designed on the surrounding site. The purpose of the object is in the concept of preschool education. The concept is based on children acquiring the fundamentals of key qualities from outset and acquiring prerequisites for their lifelong learning.
|
|
|
Detached House with Travel Office
Lavička, Jan ; Gintar, Jan (referee) ; Králová, Zuzana (advisor)
In my bachelor thesis I deal with a project of a single-family house with a travel agency. The building will be implemented in the village Lanžhot near Břeclav. It is a two-storey house with a partial basement. Bearing walls are made of ceramic blocks with embedded mineral wool. In the basement shuttering blocks with thermal insulation are used. The building is provided with a shed roof and a single skin flat roof with extensive greenery. A part of the project is a garage designed as a wooden frame structure.
|
|
|
Detached house with business premises
Češka, Ondřej ; Průša, David (referee) ; Sukopová, Dáša (advisor)
The aim of my bachelor thesis is to design and elaborate project documentation for building of a family house with a design office. The building of the family house is located in the cadastral area of Mikulovice near Pardubice. It is a two-storey, partly basement detached house, which corresponds to the conditions of operation of the building. The family house is designed for a family of four. On the 1st floor there is a WC + bathroom with a technical room and a gym. On the 1st floor there is a design office, which is intended for the homeowner, then a kitchen, a living room, a guest room with its own dressing room, a workshop connected with the garage. On the 2nd floor there is a living area consisting of three rooms and a studio. The structural system of the building is designed from the POROTHERM system with an external contact insulation system ISOVER GREYWALL with a thickness of 120 mm. Vertical load-bearing peripheral structures of 1st floor, 1st floor and 2nd floor will be made of POROTHERM 30 P + D. The inner bearing walls are made of POROTHERM 30 P + D and POROTHERM 19 AKU and POROTHERM 11,5 PROFI are used for non-bearing masonry. The exterior plaster is a CEMIX FLEXI thin-film, water-repellent, fluted with 2 mm grain in light gray. The staircase is designed with reinforced concrete monolithic. The horizontal load-bearing structures consist of the ceramic-concrete system POROTHERM (beams Pot and inserts Miako) th. 250 mm. The roof is gabled with TONDACH Hranice 11 roofing in black. Doors and windows are designed in gray and white, garage doors are designed in gray. Floor coverings are designed taking into account the use of individual rooms, namely ceramic tiles and laminate flooring. The main goal of my work was to solve the disposition for the given purpose, ie to design a suitable construction system and to draw up the drawing documentation including the text part. The bachelor thesis is processed in the form of project documentation for construction.
|
|
|
Mixed-use Building
Fibikar, Tomáš ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.
|
|
| |
|
|
Rodinný dům
Lenďák, Dávid ; Machová, Petra (referee) ; Vajkay, František (advisor)
The subject of this bachelor thesis is to elaborate project documentation for a detached family residence. The family house is located in Brno-Královo Pole, the cadastral area of Sadová. The family house is located on relatively flat land and is situated to the south side. The house has two above ground floors, with balconies on the second floor and a flat roof. On the east side there is a garage and storage room. The whole construction of the family residence is from wood, with the main focus on construction materials from the company Steico. The insulation materials are all from the company Isover. Project documentation was done in a computer software Revit.
|
|
|
Timber Frame House
Juhászová, Michaela ; Hlásková, Michaela (referee) ; Králová, Zuzana (advisor)
This bachelor’s thesis deals with design of a timber frame house situated in the cadastral area Čechovice u Prostějova, region Prostějov. It is a detached house standing in existing resident area. It is designed for a family of four. The house has two storeys and inbuilt garage. There is the shed roof. It is designed as a timber frame construction with Rigidur boards.
|
guest ::
